NEC 2023 Rapid Shutdown: What Installers Must Know
690.12 has not changed as much as the rumors suggest — but how AHJs read it has. Here is what actually gets flagged on plan review.
Read articleBlog
Notes from the plan review desk
Practical writing on code cycles, AHJ behaviour and design economics — written for people who submit permits for a living.
Why Permits Get Rejected: 7 AHJ Red Flags
A rejected permit is rarely an engineering failure. It is almost always a documentation gap. These seven show up again and again.
Read articleIn-House vs Outsourced Solar Design: Real Cost Breakdown
A fully loaded in-house drafter costs more per set than most owners assume — and the gap widens the moment volume gets lumpy.
Read articleNEC 705.12 Busbar Calculation: Step-by-Step for Solar Installers
The 120 percent rule is not optional and it is not complicated — but getting the numbers wrong is the second-fastest way to get a plan set rejected.
Read articleHow to Submit a Solar Interconnection Application: A Practical Guide
The interconnection application is not an engineering document — it is a compliance document. Treat it that way and approval rates go up immediately.
Read articlePVsyst Loss Tree Explained: How to Read Your Simulation Report
A PVsyst simulation is only as useful as your ability to read the loss tree. Here is what each line means and where the real design insights hide.
Read articleGround Mount vs Rooftop Solar Design: Key Engineering Differences
A ground mount is not a rooftop system laid on the ground. The structural, electrical, and permitting differences are significant — and they show up in the plan set.
Read articleBESS Design for Solar: NEC 706 Compliance Essentials
NEC 706 governs energy storage systems and it is not optional. Here is what the code requires and what AHJs are actually checking on plan review.
Read articleSend specs tonight. Review the set tomorrow.
Response within 4 business hours. First plan set at 50% off — free if we miss the 48-hour deadline.